Форум обсуждение

Send message

[ +7-981-8529467 (Санкт-Петербург)

t.me/os2_guru

 
Update

 
Applications

 
Advantages:

 
For developer:

 
(Пайпы программ)

 
Companies:

 
History:

 
(Бонусы)

 
Advice:

 
(Барьеры и решения)

 
Technologies:

 
(Применение в науке, лаборатории, ..)

 
Solutions

 
New eComStation:

 
Future:

 
(Ссылки на другие сайты)

 
(Картинка дня)

 
OS/2 artefacts:

 
Gadgets:

Hardware > Motherboards EliteGroup A780GM-M3 (Rev. 1.0) Homepage: Specification

?>

EliteGroup A780GM-M3 (Rev. 1.0)

Mark: Very good

Board: Elitegroup A780GM-M3 (Rev. 1.0)
Graphics onBoard Radeon HD3100, set to 32 MB
CPU: AMD Athlon II X2 250 (2x3,0 GHz)
Memory: Kingston 2x 2GB (800 MHz, CL6)
OnBoard-LAN: Atheros AR8121 
   (not recognized by GenMAC)
Solution: PCI-Card RTL 8169

Disks:

• First HDD[SATA]: 64 GB SSD (Corsair) for System-Partitions
• second HDD[SATA]: 60 GB 2.5 Inch (for swap + temp. files)

Installation of eCS 2.0 rc6:

• ACPI: Parameter = ACPI.PSD /SMP /!NOD /SAP:0x10 /CD
• NO SNAP !! -- use VGA, in 2. step choose PANORAMA

Conclusion:

• Works fine with some manual settings !(several intallations)
• Grafik = ATI Radeon HD3200
• CPU Monitor : shows only 1 Core!
• Sound works (UNIAUD)

Shutdown problem eleminatet by inserting in CONFIG.SYS :

rem -----------
DEVICE=C:\\OS2\\BOOT\\APM.SYS /b /d /v1.1
DEVICE=C:\\OS2\\MDOS\\VAPM.SYS
rem -----------

Shutdown via SMARTBAR is possible without Freeze.

Board: Elitegroup A780GM-M3 (Rev. 1.0)
Grafik onBoard Radeon HD3100, auf 32 MB gesetzt
CPU: AMD Athlon II X2 250 (2x3,0 GHz)
Memory: Kingston 2x 2GB (800 MHz, CL6)
OnBoard-LAN: Atheros AR8121 
   nicht von GenMAC erkannt
LЖsung: PCI-Karte RTL 8169

SSD:

• Erste HDD [SATA]: 64 GB SSD (Corsair) -- System-Partitionen
• Zweite HDD[SATA]: 60 GB 2.5 Zoll (fЭr swap + temp. files)

Installation von eCS 2.0 rc6:

• ACPI: Parameter = ACPI.PSD /SMP /!NOD /SAP:0x10 /CD
• KEIN SNAP !! -- VGA, in 2. schritt PANORAMA wДhlen

Zusammenfassung:

• Funktioniert gut mit Nacharbeiten !(mehrere Intallations-Versuche)
• Grafik = ATI Radeon HD3200
• CPU Monitor zeigt nur 1 Kern!
• Sound funktioniert (UNIAUD)

Shutdown Problem beseitigt durch ErgДnzung in Config.sys :

rem -----------
DEVICE=C:\\OS2\\BOOT\\APM.SYS /b /d /v1.1
DEVICE=C:\\OS2\\MDOS\\VAPM.SYS
rem -----------

Abschalten Эber SMARTBAR ist nun wieder mЖglich, kein 'HДnger' beim Runterfahren.

Information is sent by: AS -- 2010-02-13 17:47:00

[GoogleAdv]

Comment this note (add comments, don't expect that other users will reply or join discussions here)
	Your Name: Your E-Mail: CODE:
Your Comment:

eCo Software is participating in the conferences. We made more than 15 presentations. We published more than 10 reports.

 
For dummies

 
Reviews